Today I’m continuing with building up the elevator trim tab. I’m starting by filing down the edges to get 3/32 inch clearance between the tab and the elevator. Once I got the edges filed down, I started to work on the trim tab end ribs. The S-51 plans don’t provide much detail here so I’m […]
Elevator Trim Tab
Continuing with building up the elevators, today I’m going to focus on getting the trim tab hinge aligned and positioned. To begin, I used a scrap metal strip to simulate the skin. I wanted to make sure the trim tab skin is in alignment with the elevator skin surface. Below is a picture from the […]
Left Elevator Assembly and Hinge Brackets
Today I’m continuing with the assembly of the left elevator. Before I get to riveting there is a bit of work that is still required on this elevator. Most notably is building the trim tab, however before I get there I need to do some more work to final size all the rivet holes and […]
Elevator Trim Tab Trimming
This evening was spent trimming the elevator trim tab skin. The skin came formed, however it was too long in both width and length, so lots of trimming is needed. As always, this kind of work is slow and steady but the results are worth it. Previously the trim tab we trimmed and filed down […]